Tag Archives: auto-ui

Coming up: CHI 2016 course on automotive user interfaces

At this year’s CHI conference Bastian Pfleging, Nora Broy and I will present a course introducing automotive user interfaces. Here’s the course abstract:

The objective of this course is to provide newcomers to Automotive User Interfaces with an introduction and overview of the field. The course will introduce the specifics and challenges of In-Vehicle User Interfaces that set this field apart from others. We will provide an overview of the specific requirements of AutomotiveUI, discuss the design of such interfaces, also with regard to standards and guidelines. We further outline how to evaluate interfaces in the car, discuss the challenges with upcoming automated driving and present trends and challenges in this domain.

Interested? Please register through the conference registration system and sign up for our course.

AutomotiveUI 2013: A brief report

At the end of October I was in Eindhoven for AutomotiveUI 2013. The conference was hosted by Jacques Terken, who along with his team did a splendid job: from the technical content, to the venue, to the banquet, and the invited demonstrations, everything was of high quality and ran smoothly. Thanks Jacques and colleagues!

The conference started with workshops, including our CLW 2013. The workshop was sponsored by Microsoft Research and it brought together over 30 participants. In addition to six contributed talks, the workshop featured two invited speakers. The keynote lecture was given by Klaus Bengler who discussed challenges with cooperative driving. Tuhin Diptiman discussed the implications of the 2013 NHTSA visual manual guidelines on the design of in-vehicle interfaces. Thanks Klaus and Tuhin for your engaging presentations! See pictures from CLW on Flickr.

The main conference included talks, posters and demos. Our group was productive: we had one talk and three posters. One of the memorable moments of the conference was the invited demos. I had a chance to ride in a TNO car using Cooperative Adaptive Cruise Control (CACC). See the video below (the driver and narrator is TNO researcher E. (Ellen) van Nunen – thanks Ellen!

See my pictures from the conference on Flickr.

LED Augmented Reality: Video Posted

During the 2012-2013 academic year I worked with a team of UNH ECE seniors to explore using an LED array as a low-cost heads-up display that would provide in-vehicle turn-by-turn navigation instructions. Our work will be published in the proceedings of AutomotiveUI 2013 [1]. Here’s the video introducing the experiment.


[1] Oskar Palinko, Andrew L. Kun, Zachary Cook, Adam Downey, Aaron Lecomte, Meredith Swanson, Tina Tomaszewski, “Towards Augmented Reality Navigation Using Affordable Technology,” AutomotiveUI 2013

CLW 2012 report

The 2012 Cognitive Load and In-Vehicle Human-Machine Interaction workshop (CLW 2012) was held in conjunction with AutomotiveUI 2012 in Portsmouth, NH. The workshop was the second CLW in a row – CLW 2011 was held at AutomotiveUI 2011 in Salzburg, Austria.

Over 35 people from government, industry and academia attended CLW 2012.

For CLW 2012 the organizers made the decision to involve a large number of experts in the workshop, instead of only including contributions by authors responding to our CFP. Thus, the CLW 2012 program included three expert presentations, as well as a government-industry panel with four participants. Each of these expert participants discussed unique aspects of estimating and utilizing cognitive load for the design and deployment of in-vehicle human-machine interfaces.

Bryan Reimer opened the expert presentations with a discussion of the relationship between driver distraction and cognitive load. Next, Bruce Mehler discussed practical issues in estimating cognitive load from physiological measures. Finally, Paul Green discussed how cognitive load measures might fit in with the NHTSA visual-manual guidelines.

The expert presentations were followed by a government-industry panel. Chris Monk (Human Factors Division Chief at NHTSA) presented the NHTSA perspective on cognitive load and HMI design. Jim Foley (Toyota Technical Center, USA) introduced the OEM perspective. Scott Pennock (QNX & ITU-T Focus Group on Driver Distraction) introduced issues related to standardization. Garrett Weinberg (Nuance) focused on issues related to voice user interfaces.

Following these presentations, and the accompanying lively discussions, workshop participants viewed eight posters.

At the end of the workshop we asked participants to indicate their level of agreement with these four statements:

  1. I found the workshop to be useful.
  2. enjoyed the workshop.
  3. would attend a similar workshop at a future AutomotiveUI conference.
  4. This workshop is the reason I am attending AutomotiveUI 2011.

The responses of 13 participants are shown below (the workshop organizers in attendance did not complete the questionnaire). They indicate that the workshop was a success.

Next steps
Since  the conclusion of CLW 2012 co-organizers Peter Froehlich and Andrew Kun joined forces with Susanne Boll and Jim Foley to organize a workshop at CHI 2013 on automotive user interfaces. Also, a proposal for CLW 2013 at AutomotiveUI 2013 is in the works.

Thank you presenters and participants!
The organizers would like to extend our warmest appreciation to all of the presenters for the work that went into the expert presentations, the panel discussion, and the poster papers and presentations. We would also like to thank all of the workshop attendees for raising questions, discussing posters, and sharing their knowledge and expertise.

You can see more pictures from CLW 2012 on Flickr.

This report is also available on the CLW website.

AutomotiveUI 2012 report published in IEEE Pervasive Computing

The report on the AutomotiveUI 2012 conference, co-authored by Linda Boyle, Bryan Reimer, Andreas Riener and me, was recently published by IEEE Pervasive Computing [1]. The reference on this page points to my final version of the paper. You can also download the paper with the published layout directly from the IEEE here.



[1] Andrew L. Kun, Linda Ng Boyle, Bryan Reimer, Andreas Riener, “AutomotiveUI: Interacting with technology in vehicles,” IEEE Pervasive Computing, April-June 2103

AutomotiveUI 2012 covered in local media


AutomotiveUI 2012 was covered in three excellent articles in local media in New Hampshire.

First, Paul Briand introduced the conference in a front-page article in the October 20 issue of the Portsmouth Herald. I am glad that Paul pointed out that this is a multi-disciplinary conference, and also that he included nice quotes from UNH researcher Oskar Palinko, who touched upon visual and cognitive distractions.

Next, UNH’s Beth Potier discussed our work in an excellent article in UNH Today. One of the highlights of Beth’s article for me was that she referenced two studies – our work on augmented reality published at MobileHCI 2011, and follow-on work being conducted by a team of UNH ECE seniors, as part of their senior project. Another highlight was this illustration by Bridget Finnegan:

Finally, Liz Markhlevskaya discussed the conference, and our work at UNH, in an article in the Foster’s Daily Democrat. I really like the fact that Liz clearly connected our work on deploying the Project54 system with our more recent driving simulator-based work.

CLW 2012 to be held at AutomotiveUI 2012

The Cognitive Load and In-Vehicle Human-Machine Interaction workshop (CLW 2012) will be held on October 17, at AutomotiveUI 2012. The workshop will be one of six workshops at the conference. Along with the Automotive Natural User Interfaces workshop, CLW 2012 is now in its second year, and hopefully to be established as a permanent workshop at the conference series.

Personal and Ubiquitous Computing theme issue: Automotive user interfaces and interactive applications in the car

I’m thrilled to announce that the theme issue of Personal and Ubiquitous Computing entitled “Automotive user interfaces and interactive applications in the car” is now available in PUC’s Online First. I had the pleasure of serving as co-editor of this theme issue with Albrecht Schmidt, Anind Dey, and Susanne Boll.

The theme issue includes our editorial [1], and three papers. The first is by Tuomo Kujala, who explores scrolling on touch screens  while driving [2]. The second is by Florian Schaub, Markus Hipp, Frank Kargl, and Michael Weber, who address the issue of credibility in the context of automotive navigation systems [3]. The third paper is co-authored by me, my former PhD student Alex Shyrokov, and Peter Heeman. We explore multi-threaded spoken dialogues between a driver and a remote conversant [4]. The three papers were selected in a rigorous review process from 17 submissions, by approximately 50 reviewers.



[1] Andrew L. Kun, Albrecht Schmidt, Anind Dey and Susanne Boll, “Automotive User Interfaces and Interactive Applications in the Car,” PUC Online First

[2] Tuomo Kujala, “Browsing the Information Highway while Driving – Three In-Vehicle Touch Screen Scrolling Methods and Driver Distraction,” PUC Online First

[3] Florian Schaub, Markus Hipp, Frank Kargl, and Michael Weber, “On Credibility Improvements for Automotive Navigation Systems,” PUC Online First

[4] Andrew L. Kun, Alexander Shyrokov, and Peter A. Heeman, “Interactions between Human-Human Multi-Threaded Dialogues and Driving,” PUC Online First